Salt Water Chlorinators -Spas

SmarterSpa+ Hot Tub & Spa Saltwater Chlorinator w/ Chlorine 
Detection and App, Controlomatic (SmarterSpa+)

Download the APP to use from Anywhere! Specs: 30 gram per day, Self Cleaning, Up to 1000 gallons, 15′ power cord, 10′ cell cord, 110/220 VAC, 5Vdc power. The SmarterSpa+ requires no spa modification. Simply attach the control panel to the Spa skirt, add 1.5 pounds of salt per 100 gallons of spa water, drape the cell            over the side into the spa water and plug it in. The power supply uses 110 / 220 VAC and outputs a low voltage 5Vdc to the Cell. The SmarterSpa sysemts don’t operate on a timed cycle like all other salt chlorine generators. SmarterSpa & SmarterSpa+are the only salt chlorine generator in               the world with chlorine detection built into the cell. Traditional salt systems turn on at a fixed cycle which is called the power level, they turn of if they need             to or not. The SmarterSpa systems measure the chlorine, and when it needs more will start a chlorine generation cycle. Even if you set the chlorine                             production to maximum, it will not over-chlorinate your spa. It can be a challenge to to keep the water in your spa or hot tub crystal clear and odor free. If you forget to add chlorine for a single day or the chlorine feeder runs           out and you don’t refill it that could lead to spa problems. Due to the higher temperature of the water the chemical balance is critical to be continuously. maintained to keep it safe. Proper spa maintenance leads to your spa being safe when you want to use it. Even if the water looks good you should measure              the chemical balance before use. Spa chlorine generators can greatly reduce spa problems and spa maintenance as they continuously make chlorine (or                    bromine) every day so you don’t have to. SmarterSpa comes in a drape over the side version with a cell that allows for removing the titanium plates. To install inline simply remove the electrode and                    purchase the fittings needed to install in with the plumbing in your spa. The SmarterSpa(+) electrodes can be easily removed from the cell for cleaning if needed. Even though reversing polarity is provided, if the calcium hardness in              the water is very high cleaning may be needed from time to time. The blue cable is 10 feet long and has 2 wires for supplying power to the titanium plates and          2 wires for the chlorine detection sensor.